BCHXJ - POWER-CUT HD-600
- MSDS: BCHXJ
- Manufacturer: DOALL COMPANY
- Product Name: POWER-CUT HD-600
- National Stock Number: 9150-00N001765
Product Identification
Product ID:POWER-CUT HD-600
MSDS Date:01/01/1985
FSC:9150
NIIN:00N001765
MSDS Number: BCHXJ
Responsible Party
Emergency Phone: 312-824-1122
Cage: 02637
Contractor
Telephone: 847-803-7366
Cage: 02637
Ingredients
POLYGLYCOL
Fraction By Weight: 29%
FATTY ACID
Fraction By Weight: 12%
ALKANOLAMINE
Fraction By Weight: 6%
ORGANIC PHOSPHOROUS COMPOUNDS
Fraction By Weight: 3%
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 50 - 55%
Hazards
Effects of Overexposure:EYE: MAY IRRITATE. SKIN: DEFATTING OF NATURAL
SKIN FATS. INGEST: MAY CAUSE SLIGHT NAUSEA.
First Aid
First Aid:EYE: FLUSH WITH PLENTY OF WATER FOR 15 MIN. SKIN: FLUSH WITH
PLENTY OF WATER FOR 15 MIN. INGEST: NON-TOXIC, LAVAGING MAY BE
CONSIDERED TO PREVENT NAUSEA.
Fire Fighting
Flash Point:SEE SUPP DATA
Extinguishing Media:WATER, CO*2, ETC.
Fire Fighting Procedures:NONE
Accidental Release
Spill Release Procedures:SUCTION OR MOP UP SPILL, CLEAN AREA WITH WARM
WATER. REMOVE SPILLS IMMEDIATELY AS THEY CAN BECOME SLIPPERY OR
TACKY.
Handling
Handling and Storage Precautions:STORE BETWEEN 40-110F;4-43C.
Exposure Controls
Respiratory Protection:MFR STATES N/A.
Protective Gloves:NOT REQUIRED
Eye Protection:NOT REQUIRED
Other Protective Equipment:NONE NORMALLY REQUIRED
Supplemental Safety and Health
B.P. VALUE IS APPROX. V.P. VALUE IS AT 77F;25C. FL.PT.: AFTER
EVAPORATION OF ALL WATER, APPROX 400F,204C. NO
N-NITROSODIETHANOLAMINE DETECTED IN PRIVATE LAB TESTS, DETECTION
LIMIT: 2.2 PPM.
Chemical Properties
Boiling Pt:B.P. Text:212F;100C
Vapor Pres:10
Spec Gravity:1.053
Solubility in Water:COMPLETE
Appearance and Odor:TRANSPARENT, AMBER TO CLEAR, SLIGHT PLEASANT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
CONC PROD MAY EFFECT LACQUERS, ENAMELS & SYNTHETIC RUBBERS.
Stability Condition to Avoid:DO NOT EXPOSE MAGNESIUM CHIPS OR FINES TO
PRODUCT.
Disposal
Waste Disposal Methods:MFR RECOMMENDS THREAING AS A DETERGENT MATERIAL.
DISPOSAL METHOD MUST BE IAW FED, STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.